EQUIPMENT FOR THE MANUFACTURING OF NAILS
PAPER STRIP NAIL MACHINE
Paper Collated Nails for Nailer
Paper Strip Nails are used in rack type pneumatic nailing hammers and are pinned together in a single line (rail).
One worker with a pneumatic hammer and a set of rack nails can replace several people that use conventional hammers and ordinary nails. In addition, this method is the safest for the worker, since everything is automated; the risk of damage or injury is reduced to a minimum.
Paper Strip Nails will significantly reduce the cost of production and improve employee productivity. In addition, the paper tape leaves almost no waste during the installation process.
Paper Strip Nails are used for automated wooden structures fastening where high strength of parts connection is required.
Paper Strip Nails are designed for wood paneling, installation of window and door blocks, flooring fixing, packaging making, packaging, wooden structures under dynamic and vibration loads, fences, and finally for general construction works, including cladding and finishing.
Paper Strip Nails are divided into three groups: screw shank paper strip nails, ring shank paper strip nails, and smooth shank paper strip nails.
Manufacturing of Paper strip nails
Special collator machine that collects nails into paper clips is used in production of Paper Strip Nails for rack type pneumatic nailing hammers. Ring shank nails, screw shank nails or special/smooth shank nails are used as blanks for the collator machine. The collator machine has a built-in varnishing and painting system.
For a full cycle of production of Paper strip nails, the following set of equipment is needed:
- Nail Making Machine
- Thread Roller (in case manufacturing ring shank nails or screw nails)
- Nail Polishing Machine
- Anti-corrosion coating equipment (if necessary)
- Paper Strip Nail Collator Machine
Paper Strip Nail Collator series RLZ-1000
High Speed Paper Strip Nail Collator is specifically designed for automatic assembly of finished nails onto a paper strip, which is used for nail pneumatic hammers. This automatic nailing machine assembles finished nails onto paper strips (cassettes). The angle of a nail in a strip can be adjusted from 0° to 34°; the distance between nails in a strip is also adjustable.
Specifications of Paper Strip Nail Collator
|Nail Length||45 - 100 mm|
|Wire Rod Diameter||2.87 - 3.26 mm|
|The Angle of the Nails in the Paper Clip (Cassette)||0° - 34°|
|Total power||10 kW|
|Electrical Power Supply||380В 3P 50 - 60Hz|
|Air Pressure||6 kg/sm2|
|Overall Dimensions||6600 х 1600 х 1700 mm|
|Weight of equipment||2000 kg|
Paper Strip Nail Manufacturing Process Flow Chart
assembling nails in the paper clip
finished products before control
and packaging operations