TMA Oil cleaning and recovery equipment. Intelligent high-speed oil residue separator. Working principle of oil residue separator. Oil removal machine. Application of oil removal machine. Concentrated oil removal system. Description and specification of concentrated oil removal system. On-line conveyor. Magnetic conveyors. Introduction and Technical Parameters of On-line conveyor. Taiwan equipment on Global market.
 tel. +886-2-278-45675
 fax.+886-2-278-45676
 e-mail:      info@rgt.tw

OIL CLEANING AND RECOVERY EQUIPMENT


INTELLIGENT HIGH-SPEED OIL RESIDUE SEPARATOR RTS-A SERIES


Application of oil residue separator RTS-AV

The machine has been widely used in solid-liquid separation from concentrated filtering of forming oil for cold heading, drawing oil (liquid), lapping oil (liquid), cutting oil (liquid) and thread rolling oil, etc.

Intelligent high-speed oil residue separator
Oil residue separator RTS-AV



Application of oil residue separator RTS-AIV

The machine has been widely used in solid-liquid separation from online circulation of forming oil (liquid), buffing oil (liquid), phosphating solution and electroplating effluent etc.

Intelligent high-speed oil residue separator
Oil residue separator RTS-AIV



Working principle of oil residue separator

After being absorbed into the centrifugal reel for separation in separation area, the substances to be separated will be separated by virtue of different centrifugal forces obtained from the centrifugal field as different mediums in the substance have different specific gravities. The separated clean liquid will be discharged naturally from the oil discharge outlet. The sediment will be discharged automatically after the sediment thickness reaches the desired setting.


Technical Parameters of oil residue separator RTS-A series

Model RTS-AV RTS-AIV
Filter type Centrifugal Separation
Sediment Discharging Mode Automatic Sediment Discharging
Reel capacity 2,3 L 1,5 L
Maximum Processing Capacity 100 L/min 40 L/min
Rotation Speed 5200 rpm 7200 rpm
Centrifugal Force G 3500G 5500G
Power Supply Voltage 380V 4P 50Hz / 220V 3P 60Hz
Total Power 1,2 kW
Main Motor 1,1 kW 3P 380V / 1.1 kW 3P 220V
Auxiliary Motor 0,06 kW 4P 380V / 0,06 kW 4P 220V
Inlet Pipe Diameter 32A 25А
Outlet Pipe Diameter 80A 60А
Air Pressure Scope 0.4 - 0.6 Mpa
Starting Mode Starting with Frequency Converter
Control Panel Touch Screen
Control Mode Automatic / Manual
Overall Dimensions 1000 × 550 × 1600 850 × 510 × 1480
Equipment Weight 245 kg 200 kg



OIL REMOVAL MACHINE RT1200-2/3


Application of oil removal equipment RT1200-2/3 series

The equipment has been widely used for cold heading forming work blanks. The cold heading work-pieces are conveyed into the oil removal machine by conveyor in the oil removing machine, the grease and impurities attached on the surface of work pieces are removed by virtue of high-speed centrifugal force. The PLC system is combined with this system and adjusted flexibly in accordance with the production on site, realizing unattended intelligent management and standardized energy saving and environmental protection.

oil removal machine
Oil removal machine RT1200-2


oil removal machine
Oil removal machine RT1200-3



Size Marking

оборудование для удаления масла


Technical Parameters of Equipment

Oil Removal Machine RT1200-2 RT1200-3
Rated Speed 1450 rpm/ m 1100 rpm/ m
Maximum Capacity 10 kg / time 20 kg / time
Power Supply Voltage 380V 4P 50Hz
Rated Power 1.2 kW/h 2 kW/h
Centrifuge Motor 0.75 kW/h 1.5 kW/h
Air Pressure Scope 0.4-0.6 Mpa
Start/Stop Mode Start/Stop with Frequency Converter
L1 Dimensions 550 / 1050 / 1500 / 2000 mm
L2 Dimensions 750 mm 860 mm
L3 Dimensions 640 mm 880 mm
L4 Dimensions 340 mm 340 mm
W1 Dimensions 200 / 260 / 350 mm 200 / 240 / 280 / 320 mm
W2 Dimensions 96 / 140 mm 200/ 240 mm
W3 Dimensions 500 mm 700 mm
Control Mode Automatic Control
Operation Panel Touch Screen
Conveying Method Magnetic / Chain Joint / Mesh Belt Link Joint / Mesh Belt
Conveying Motor 0.2 kW/h
Applicable Nuts M4 mm - M22 mm M4 mm - M32 mm
Applicable Screws L≤80 mm φ≤12 mm L≤120 mm φ≤20 mm
W4 Dimensions 450 mm
H1 Dimensions 610 mm 700 mm
H2 Dimensions 1512 mm 1843 mm
H3 Dimensions 1840 mm 2100 mm
H4 Dimensions 300 mm - 500 mm (adjustable)
H5 Dimensions 600 / 800 mm
H6 Dimensions 1720 mm



CONCENTRATED OIL REMOVAL SYSTEM RT1200-4

concentrated oil removal system


Size Marking

concentrated oil removal system



Application of concentrated oil removal system

This system applies to concentrated oil removal in later stage for tapping, thread rolling, anti-rust oil immersing and thermal protection lines, with the advantages of being simple in operation, stable in structure, big in Processing Capacity, standard in site management and saving labor force, etc.


Technical Parameters of Concentrated Oil Removal System

Rated Speed 1100 rpm/ m Control Mode Automatic Control
Maximum Capacity 35 kg / time Operation Panel Touch Screen
Power Supply Voltage 380V 4P 50Hz Conveying Method Magnetic / Chain Joint / Mesh Belt
Centrifuge Motor 2.2 kW/h Conveying Motor 0.4 kW/h
Air Pressure Scope 0.4-0.6 Mpa Applicable Nuts M4 mm - M22 mm
Start/Stop Mode Start/Stop with Frequency Converter Applicable Screws L≤150 mm φ≤50 mm
Lift Height 800 mm Storage Capacity 500 kg
L1 Dimensions 550 mm H1 Dimensions 700 mm
L2 Dimensions 900 mm H2 Dimensions 2040 mm
L3 Dimensions 1020 mm H3 Dimensions 2320 mm
L4 Dimensions 400 mm H4 Dimensions 780 mm
L5 Dimensions 700 mm H5 Dimensions 80 mm
L6 Dimensions 940 mm H6 Dimensions 2000 mm



ON-LINE CONVEYOR RTS-SJ18

on-line conveyor


Size Marking

on-line conveyor


Introduction of Equipment

Magnetic conveyors have been widely used for small-size products in cold heading/thread rolling/tapping industries. They are fully capable of eliminating the risks of material dropping, blocking and return mixing of traditional conveyor. The link joint or mesh belt conveyors apply to big-size products, and have the advantages of smashing resistance and stability.



Technical Parameters

Power Supply Voltage 380V 4P 50Hz
Motor Power 200W / 400W
L1 (Tail length) 750 / 1300 / 1600 / 2000 mm
H1 (Discharge point) 750 mm
H2 (Overall height) 1365 mm
H3 (Receiving port) 250 / 300 mm - 470 mm
H4 (Overall height of receiving point) 470 / 620 mm
W1 (Width of Receiving point) 200 / 300 / 350 mm
L3 × W2 × H5 (Storage hopper) 520 × 370 × 350 mm
Opening method for storage hopper Manual / automatic with cylinder / rotating structure
Type of conveyor Magnetic / link joint or mesh belt
W3 Size 96 / 140 / 120 / 240 mm
Color requirements Blackish green / white

The machine of different sizes may be customized according to particular requirements.



TOP