Taiwanese equipment for weighing and packing fasteners and hardware in various packaging containers: cardboard boxes, cardboard boxes and plastic bags
 tel. +886-2-278-45675
 fax.+886-2-278-45676
 e-mail:      info@rgt.tw

EQUIPMENT FOR PACKING FASTENERS IN A PACKING CONTAINER

 

The process of packing and packaging machine-building fasteners on the line includes the following main technological operations:

fastener packing
  1. Unloading a batch of fasteners from a factory container (ship shape bin) using a crane into a vibrating hopper of the packaging line;
  2. Gradual transportation of fasteners from the vibrating hopper to the filling unit using a magnetic lifting conveyor. From the vibrating hopper, the fasteners are gradually poured under the influence of vibration and gravity onto the primary feed device. Under the influence of vibration, a uniform supply of the original product to subsequent units is ensured and the absence of clumping of lengthy fasteners.
  3. Sequential operations of rough and precise packing of fasteners into batches with a predetermined weight. At the exit from the primary feeder, the fasteners are gravity fed into the secondary and tertiary feeders. The packing error of the weighing unit is not more than ±1% of the specified weight.
  4. Delivery of the formed batch of fasteners to the packing vibrating chute. Formation of empty boxes is carried out by service personnel. The formed boxes are placed on a driven feed conveyor, from where, by means of a conveyor belt, a sensor system and a movable table, they are positioned in the position of loading the fasteners exactly under the electromagnet tray. When the gates of the storage hopper of the distribution unit are closed and a new batch of fasteners is set, the movable tray goes down, entering the corrugated cardboard container. Thus, when the fasteners are poured from the vibrating tray into the chute, the complete unloading of the collected batch into the container is ensured without spilling products outside the box. At this moment, the movable table moves to its original position to receive the next empty box. After the end of the cycle, the chute rises vertically upward, and the filled carton with oriented products is pushed by the movable table onto the discharge conveyor.
  5. Gradual pouring of the formed batch of fasteners into the corrugated container with simultaneous electromagnetic orientation. When packing fasteners into corrugated cardboard containers, the assembled batch of products is gradually poured into the unit for electromagnetic orientation of fasteners. Such a feed allows avoiding damage to the bottom of the corrugated cardboard box when unloading a batch of large weight and creates optimal conditions for orienting the fasteners when passing through the electromagnet.
  6. Transportation of the filled box to a vibration station for vibrating fasteners in a container. The driven discharge conveyor moves the filled carton of product onto the vibrating table. If the weight of the finished box does not match the specified parameters, the box is pushed onto a non-driven roller conveyor, where the service personnel can adjust the weight of the product in the box and then put the box back on the conveyor. On a vibrating table, vibro-laying (shaking) of products in a box is performed. The vibrating table is located at a slight angle, due to which the shaking box under its own weight moves to the accumulating non-drive roller table. Next, the service personnel manually close the box flaps and tap the seams with adhesive tape as the box passes through the conveyor.
  7. The box arrives at the palletizing station. The formed box is transferred to an automatic pallet forming station (palletizer). Pallets are automatically fed to the station from the store for 5-6 pallets. The first operation is to turn the box to the required position on the rotary roller table. Further, a separate row is formed from the correctly rotated boxes, which is then shifted onto a pallet using a hydraulic pusher. When the next layer is collected, the pallet moves down to the height of the box, so that the pusher moves the next row of boxes to the previous layer. Cardboard spacers between layers, if necessary, are laid manually by service personnel. The finished pallet is transported by a forklift to an automatic pallet stretching machine.
  8. Tightening of the formed pallet with stretch film. The pallet is installed on a rotating drive platform, the operator fixes the edge of the film on the pallet and starts the machine from the operator's console. The formed pallet is pulled by the film with a predetermined tension, overlapping height and the number of layers of the film. The packed pallet is transported by forklift to the finished product warehouse.



Automatic packing equipment for parallel packing of fasteners into boxes RG-A-B888-VA

This fully automatic packaging line performs the forming of the carton box, packing and a parallel arrangement of fasteners under the influence of electromagnetic field, bending the cover of the box, sealing carton box with fasteners, print and stick labels on the box.


Products available for packagingscrews, studs, nails, screws
Product size according to customer's requirement
Box type 90°
Maximum box dimensions (* see note)360×100×70 mm / 250×250×175 mm
Minimum box dimensions (* see note) 89×89×52 mm
Maximum box weight5-10 kg
Packing speed5-7 boxes / min
The design of the packaging line allows packing fasteners into boxes with any intermediate dimensions from the range indicated in the table.


The packaging line includes the following units and accessories:

  • open-type vibrating hopper;
  • workpiece feeding device;
  • the first stage of a flat vibration loader;
  • the second stage of the flat vibration loader;
  • the third stage of the flat vibration loader;
  • V-shaped feeding system;
  • weighing batcher;
  • excess weight control system;
  • electromagnetic layout mechanism;
  • conveyor for feeding empty boxes;
  • tools and accessories.

The packaging line operates under the control of Mitsubishi PLC (Japan), interaction with the operator is carried out using a touch screen of the GP brand (Japan). Cylinders - SMC, FESTO or a Taiwanese manufacturer of the same class.



fastener packing line RG-A-B888-VA



  • The device for electromagnetic orientation of the workpiece (magnetic orientator) ensures the orientation of the products evenly over the entire height of the packaging box.
  • The arrangement of fasteners, long screws parallel to each other, is carried out under the influence of an electromagnetic field.
  • The equipment operates under PLC control and has a touch screen interface.
  • Products available for packaging: screws, bolts, pins, nails.
  • Product size: custom size design.


fastener packing line RG-A-B888-VA



Technological process of automatic packing of fasteners into boxes

Cardboard

Auto box forming

Screw auto packaging

Auto box sealing

Computer printing / labeling



Automatic double-flow parallel packing line of fasteners cartoning RG-A-B888-2VA

The fastener packaging line is equipped with a device for electromagnetic orientation of fasteners (magnetic orientator), which ensures the orientation of products evenly along the entire height of the packaging box.

automatic double-flow line of fasteners 
cartoning



  • The arrangement of fasteners, screws parallel to each other is effected by an electromagnetic field.
  • The equipment operates under PLC control and has a touch screen interface.
  • Products available for packaging: screws, bolts, pins, nails.
  • Product size: custom size design.


automatic double-flow line of fasteners cartoning



Technological process of automatic packing of fasteners into boxes

Feeding the cardboard blank onto the conveyor

Auto box forming

Loading and parallel packaging of fasteners

Auto box sealing

Computer printing / labeling



Automatic electromagnetic parallel packing machine RG-A-C888-VA

line for packing fasteners into carton


Packaging equipment for screws, nails and bolts model RG-A-C888-VA is equipped with an electromagnetic device for orienting fasteners during stacking.

Packing speed 4 - 7 boxes / min
Weight of packing 2 - 6 kg / carton
Box type 90°
Recommended box size (* see note) (L)160 × (W)140 × (H)90 mm / (L)160 × (W)140 × (H)130 mm / (L)280 × (W)120 × (H)90 mm / (L)280 × (W)120 × (H)120 mm
The above dimensions are recommended. The customer needs to confirm whether the given dimensions correspond to his requirements.



Features of Fastener Packaging Equipment

  • Open-type vibrating hopper with a capacity of 1000 kg. The bunker is equipped with a horizontal support bar for tilting the ship shape bin with a new batch of fasteners into the bunker. Adjustment of the unloading speed (the amount of fasteners unloaded onto the intermediate vibratory chute per unit of time) is carried out by automatically adjusting the vibration frequency of the vibrating bin.
  • 1st stage of a flat vibratory loader. This is a design with a vibrating tray, the purpose of which is a gradual uniform supply of the packaged products from the loading hopper to the intermediate tray of the 2nd stage of the flat vibration loader. The vibrating chute is equipped with an electromagnetic vibrator, which is switched on and off automatically in accordance with the data received from the fastener weight control sensors.
  • The 2nd stage of the flat vibrating loader is intended for gradual uniform feeding of the packaged products onto the vibrating trays of rough and precise packing. The vibrating trays are equipped with an electromagnetic vibrator, which is switched on and off automatically, in accordance with the data received from the fastener weight control sensors.
  • 3rd stage of a flat vibration loader. The device is a rough packing vibratory chute, which serves for the primary packing of a batch of fasteners, 90% of the given weight. It is equipped with a damper with a pneumatic cylinder that blocks the supply of fasteners to the storage hopper after a batch of fasteners of a given weight has been set. A guide made of wear-resistant metal is installed inside the vibrating chute, which supplies fasteners to the vibrating chute for precise packaging. At the exit from the tray, dampers are installed, the closing / opening of which is performed by pneumatic cylinders. The vibrating chute is equipped with an electromagnetic vibrator, which turns on automatically, in accordance with the data received from the fastener weight control sensors.
  • V-shaped feeding system. The vibrating chute of precision packing is a welded structure made of stainless steel sheet. Purpose - the gradual supply of fasteners to the storage bin until the total weight of the batch is set at 100% of the specified one. The vibrating chute is equipped with an electromagnetic vibrator, which turns on automatically in accordance with the data received from the fastener weight control sensors.
  • Weighing batcher with dosage from 1 to 25 kg. The weigher provides a two-stage dosage: 90% of the target weight through the coarse filling device, and the remaining 10% through the V-shaped feeding system. Weighing error no more than ±1% of the total weight. The weigher is equipped with three funnels for filling bolts into 4-valve boxes of 25 kg, 5 kg and 1 kg.
  • The device for electromagnetic orientation of the workpiece (magnetic orientator) ensures the orientation of the fasteners to be packed evenly along the entire height of the packaging box.
  • The empty carton conveyor serves to accumulate and feed the formed empty cartons under the fastener unloading tray. It is a powered belt conveyor mounted on a separate welded frame. Turning on / off the conveyor drive is performed automatically when a signal is received about filling the box at the packing area. The design of the section for packing fasteners into a corrugated container ensures accurate positioning of empty boxes under the filling tray with the exception of jamming the edges of the boxes and spilling the fasteners outside the box.
  • Conveyor for the withdrawal of filled boxes from under the weighing batcher. After filling, the box is automatically removed from under the dispenser, freeing up space for the next box. The conveyor is equipped with a vibration-laying (shaking) mechanism for fasteners in a corrugated cardboard box and a demagnetization device for demagnetizing fasteners after magnetic orientation.
  • Filling conveyor with box inspection (rejection) devices. The boxes from the packaging machine are fed onto a driven filling conveyor equipped with a box weight inspection device to reject boxes of inappropriate weight. The signal about the inappropriate weight of the boxes is given from the load cells.
  • The maintenance platform enables the packaging machine to be serviced.
  • Control system. The line of packaging equipment is controlled by a Mitsubishi PLC.


Technological process of automatic packing of fasteners into carton

Cardboard

Auto carton forming

Screw auto packaging

Auto carton sealing

Computer printing / labeling

Auto palletizing

Auto wrapping



Automatic line for packing fasteners into carton by filling method RG-A-C888-CW

This packaging line is designed for packing and packaging machine-building fasteners and general-purpose fasteners in corrugated cardboard containers with a capacity of 1 to 25 kg and stacking containers on wooden pallets.

The dimensions and equipment of the equipment for packing fasteners into corrugated containers are developed according to the customer's requirements. To do this, you must indicate the type of product, the size of the products, the type of box, the size of the box, the type of the factory container (kubel), the direction of labeling (side, front, top, at an angle of 90 degrees), the presence / absence of a palletizer, a wrapping machine, the method of box sealing (stapler, adhesive tape, adhesive solution).

automatic line for packing fasteners into carton by filling


Type of packaging 4-flap rectangular box made of corrugated cardboard
Dosage 1 -25 kg
Recommended box size (* see note) 1kg: (L)124 × (W)80 × (H)62 × (T)2,5 mm
5kg: (L)240 × (W)160 × (H)75/85 × (T)3 mm
25kg: (L)295 × (W)260 × (H)200 × (T)4 mm
Pallet type Euro pallet 1200×800 mm with a maximum load of 1.2 tons
Number of layers height 850 mm maximum
Maximum weight of each layer 300 kg
Maximum number of boxes in a layer 32-36 boxes of 5kg
or 12 boxes of 25 kg
Productivity 1-5 kg: 5-6 boxes per minute
12-25 kg: 4-5 boxes per minute
Dimensions shown are external. The design of the packaging line allows packing fasteners into boxes with any intermediate dimensions from the specified range.



Features of the equipment for packing bolts and nuts

  • The open-type vibrating hopper has a capacity of 1000 kg. The bunker is equipped with a horizontal support bar for tilting the ship shape bin with a new batch of fasteners into the bunker. The unloading speed is controlled by automatically adjusting the vibration frequency of the vibratory hopper.
  • The device for the primary feed of the workpiece of the flat type is a structure with a vibrating tray, the purpose of which is a gradual uniform supply of products from the loading hopper to the intermediate tray of the 2nd stage of the flat vibration loader. The vibrating chute is equipped with an electromagnetic vibrator that turns on automatically in accordance with the data received from the fastener weight control sensors.
  • The billet feeding device for rough packing is a rough packing vibratory chute, which serves for the primary packing of a batch of fasteners, 90% of the given weight. The vibrating chute is equipped with a damper with a pneumatic cylinder that blocks the supply of fasteners to the storage hopper after a batch of fasteners of a given weight has been set. At the exit from the tray, dampers are installed, the closing / opening of which is performed by pneumatic cylinders. The vibrating chute is equipped with an electromagnetic vibrator that turns on automatically in accordance with the data received from the fastener weight control sensors.
  • The vibrating bowl for product orientation and precise filling is designed for the gradual supply of fasteners into the storage hopper, until the total batch weight reaches 100% of the specified one. The vibrating bowl is equipped with an electromagnetic vibrator that turns on automatically in accordance with the data received from the fastener weight control sensors.
  • Weighing batcher. Dosage from 1 to 25 kg. The weigher provides a two-stage dosage: 90% of the target weight through the coarse filling device, and the remaining 10% through the V-shaped feeding system. Weighing error no more than ±1% of the total weight. The weigher is equipped with three funnels for filling nuts in 4-valve boxes of 25 kg, 5 kg and 1 kg.
  • The empty carton conveyor serves to accumulate and feed the formed empty cartons under the fastener unloading tray. It is a powered belt conveyor mounted on a separate welded frame. Turning on / off the conveyor drive is automatic when receiving a signal about filling the box at the packing area. The design of the section for packing fasteners into a corrugated container ensures accurate positioning of empty boxes under the filling tray with the exception of jamming the edges of the boxes and spilling the fasteners outside the box.
  • Conveyor for the withdrawal of filled boxes from under the weighing batcher. After filling, the box is automatically removed from under the dispenser, freeing up space for the next one. The conveyor is equipped with a vibration-laying (shaking) mechanism for fasteners in a corrugated cardboard box. The vibrator drive is switched on / off automatically when the line is started, with the possibility of manually switching off the vibrator. After vibrating, the box goes to the filling conveyor.
  • Filling conveyor with box inspection (rejection) devices. The boxes from the packaging machine are fed onto a driven filling conveyor equipped with a box weight inspection device to reject boxes of inappropriate weight. The signal about the inappropriate weight of the boxes is given from the load cells.
  • Conveyor for manual sealing and labeling of the carton. The belt driven conveyor is installed in the line immediately after the filling conveyor. It consists of one section, 1800 mm long. The sealed cartons are fed from the conveyor onto a rotary conveyor for carton orientation.
  • The pivot conveyor for carton orientation is installed in line in front of the automatic palletizer and rotates the cartons to correctly form each layer of cartons in the palletizer.
  • The automatic palletizer is designed for automatic feeding of pallets to the loading station and stacking boxes on pallets. The location of the boxes in the layer is programmable. After the end of pallet formation, the completed pallet is automatically removed from the loading station area, making room for an empty pallet. The pick-up pallet delivery system is synchronized with the empty pallet feeding system.
  • Conveyor of the buffer zone for unloading the completed pallet. The completed pallet from the loading station of the palletizer is transported to the buffer zone conveyor, which consists of two sections. The total length of the conveyor is designed for two pallets. From this conveyor the complete pallet is transferred to the wrapping machine.
  • The automatic wrapping machine is designed for wrapping and tightening the formed pallet with stretch film. Consists of a rotating drive platform and a movable film roll holder. The wrapping machine has the function of adjusting the tension and height of the film overlay, the number of layers (revolutions) of the film. Pallet dimensions - 1200×800 mm. The maximum height of the wrapped pallet with cartons is 2000 mm. Loading capacity 1200 kg. Stretch film width 500 mm. On the rotating platform of the wrapping machine, there is a powered roller conveyor for removing the wrapped pallet onto a conveyor for temporary storage of packaged products.
  • Conveyor of the buffer zone for packed products. From the wrapping machine, the packed pallet is pushed onto the drive conveyor in the buffer zone. The conveyor consists of three sections and has a total length of three packed pallets.
  • Control system. The line of packaging equipment is controlled by a Mitsubishi PLC.




CONTACT US:
Copyright © 2007 - 2022 Rost Group & Technology Co., Ltd 
(coordinator and exclusive representative)