TMA Thread rolling equipment. Thread rolling equipment for bolt, nuts, screws, self-tappers. Thread rolling equipment for studs, rivets, tubes, special parts, thin products with non standard profile. Taiwan equipment on Global market.
 tel. +886-2-278-45675
 fax.+886-2-278-45676
 e-mail:      info@rgt.tw

THREAD ROLLING EQUIPMENT FOR FASTENERS, METALWARE AND PARTS


THREAD ROLLING MACHINES FOR THIN PRODUCTS WITH NON-STANDARD PROFILE


CUTTED PRODUCT SAMPLES

ROLLING THREADS EQUIPMENT ON THIN PRODUCTS WITH NON-STANDARD PROFILE ROLLING THREADS EQUIPMENT ON THIN PRODUCTS WITH NON-STANDARD PROFILE

Equipment for rolling threads on thin products with nonstandard profile is equipped with a specially designed feeding system and orientation of the blanks, which operates on the principle of free blank fall along the ramp, which ensures the stability and quality of the thread cutting.

Equipment is widely used for thin products, non-standard steel products and other materials, usually stainless steel, copper, aluminum and others. The equipment is completed with a pneumatic feeder and blank clamping. Parts guiding the blank to the cutting zone, including tools (taps), are stationary and fixed, while the blank turns during operation of the equipment.

This principle of operation of the machine ensures the best possible threading without waste. The spindle is able to work non-stop that increases the productivity of the machine. The equipment is completed with a counter of finished products and light events indication. There are two modes of acceleration of threading.

EQUIPMENT ASSEMBLY SHOP ROLLING THREADS EQUIPMENT ON THIN PRODUCTS WITH NON-STANDARD PROFILE



EQUIPMENT FOR HIGH-SPEED AUTOMATIC THREAD ROLLING WITH BLANKS FEEDING ALONG THE RAMP

Model of the machine RG-26 RG-38 RG-68 RG-68L RG-88
Max. outer diameter of the blank, mm 18 35 60 60 80
The largest diameter of the hole being cut, mm 8 12 35 40 30-50
Performance, pcs/min 25-60 20-40 5-30 5-25 2-10
Motor Power, hp 1 2 5 5-7.5 7.5-10
Drive cylinder air air air hydraulic
2 hp
hydraulic
2 hp
Net weight, kg 420 480 700 850 1000
Equipment Dimensions (H x W x H), mm 1050х830х1600 1220х830х1600 1420х920х1700 1700х1000х1700
550x450x650
hydraulic Press
2300х1100х1700
550x450x650
hydraulic Press
Optional equipment:
- Blank feeder
- Vibrating feeder
         


Model RG-68

EQUIPMENT FOR HIGH-SPEED AUTOMATIC THREAD ROLLING WITH BLANKS FEEDING ALONG THE RAMP


Equipment peculiarities

Equipment for rolling threads on thin products with nonstandard profile is equipped with a specially designed feeding system and orientation of the blanks, which operates on the principle of free blank fall along the ramp, which ensures the stability and quality of the thread cutting.

Equipment is widely used for thin products, non-standard steel products and other materials, usually stainless steel, copper, aluminum and others.

The equipment is completed with a pneumatic feeder and blank clamping device.

Parts guiding the blank to the cutting zone, including tools (taps), are stationary and fixed, while the blank turns during operation of the equipment. This principle of operation of the machine ensures the best possible threading without waste.

The spindle is able to work non-stop that increases the productivity of the machine.

The equipment is completed with a counter of finished products and light events indication. There are two modes of acceleration of threading.

Equipment for thread rolling is able to cut threads with a deviation of 0.1 mm when the outer diameter of the nut is at least 45 mm



Blank feeder (patented under number 098629)

EQUIPMENT FOR HIGH-SPEED AUTOMATIC THREAD ROLLING WITH BLANKS FEEDING ALONG THE RAMP


Model RG-38 With vibrating feeder

EQUIPMENT FOR HIGH-SPEED AUTOMATIC THREAD ROLLING WITH BLANKS FEEDING ALONG THE RAMP



Equipment peculiarities

ROLLING THREADS EQUIPMENT

Device for blank feeding can be positioned on the left/right of the main equipment.

The device reduces blank feeding and saves resources.

Ladder conveyor can be adjusted to the size of the product. The design has a patent .

The conveyor is equipped with sensors of the blank lack. The height of the conveyor is designed according to the statement of the Buyer.

Engine power supply: 1/4 hp
Unit size: 1300 х 800 х 2000 mm
Machine weight: 150 kg

Equipment for thread rolling is able to cut threads with a deviation of 0.1 mm when the outer diameter of the nut is at least 45 mm


EQUIPMENT FOR HIGH-SPEED AUTOMATIC THREAD ROLLING WITH BLANKS FEEDING ALONG THE RAMP



EQUIPMENT FOR BALLS GRINDING / POLISHING

Model RG-B01 (*Supplied with a device for blanks feeding balls)

EQUIPMENT FOR BALLS GRINDING / POLISHING EQUIPMENT FOR BALLS GRINDING / POLISHING


TECHNICAL SPECIFICATION OF EQUIPMENT FOR BALLS GRINDING / POLISHING

Model of the machine RG-B01
Motor Power 20 hp
Oil Engine capacity 3 hp
Performance 10 pieces /st
Stress 220V/380V/440V/460V (optional)
The current strength 45А/25А/22А/21А
Air Pressure 5 kg/cm2
The volume of the water tank 180L х 2 = 360L
Tolerance ± 0.05 mm
Performance/ h 2500-3000 pcs/h
Machine dimensions (L x W x H), mm 1500 х 1160 х 1680
Net weight, kg 1600




TOP