tel. +886-2-278-45675 (1-30)  fax.+886-2-278-45676  e-mail:     info@rgt.tw

OPTICAL SORTING EQUIPMENT WITH 360 DEGREE ROTATION

 

EQUIPMENT FOR TESTING FASTENERS AT ANGLES AND WITH 360 DEGREES ROTATION

Using servo motors and magnetic platform to focus the camera. A stepper motor rotates the product under test at different angles and 360 degrees. The data is stored in the computer and can be converted to EXCEL format for further statistical report.


RQA-2500 SERIES

Inspection machines with 360 degree rotation


  • Suitable products to verify both different categories (size in the range of 100 * 100 mm).
  • Ideal for flat objects, such as nuts, gaskets, O-rings, etc.
  • Easy to place, there is no need of alignment.
  • Automatic control, without setting up the necessary stages.
  • Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.


Parameters to be checked

The length of the screwsThe width of the headAuto focusCentreOutside diameter
Inner diameterRadiusRadianThe angle of the threadConcentric and circle


Specifications

  • Options of fasteners max. size 90 * 90 * 15 mm
  • Accuracy inspection: ±10 microns
  • Accuracy at re-inspection: ±5 microns
  • Inspection time: 60 sec / cycle
  • Machine weight net / gross: 400/531 kg
  • Dimensions equipment 1200/700/1580
  • Dimensions after setting: 1410/895/1850




RQB-1500 SERIES

Inspection machines with 360 degree rotation


  • Suitable for inspection of fasteners and lifting tackle (screws, rivets).
  • High speed and efficiency of check (10 units / session inspection).
  • Advanced telecentric lens are equipped with a parallel illumination that helps to avoid visual defects.
  • Automatic control, without setting up the necessary stages.
  • Optical and magnetic method is suitable for high-precision positioning.
  • Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.



Parameters to be checked

The height of the headThe width of the headThe angle of the cylindrical head with a rounded endThe width of the washersThe height of the washers
RadiusThe outer diameter of the threadThe inner diameter of the threadThe size of the thread pitchThe angle of the thread
The effective diameter of the threadShank diameterThe length of the shanktotal lengthThe angle of the tip


Specifications

  • Accuracy test: ±10 microns
  • Accuracy at re-inspection: ±10 microns
  • Speed test: 15 ~ 150 sec / unit
  • Machine weight net / gross: 450/620 kg
  • Dimensions equipment : 1550/750/1680
  • Dimensions of the machine after the installation: 1740/950/2060


Application area

  • The height of the head: 3 ~ 12 mm
  • The diameter of the head: 5 ~ 24 mm
  • The length of the screws (with head): 10 ~ 135 mm
  • outer screw diameter: 3 ~ 16 mm




RQC-1500 SERIES

Inspection machines with 360 degree rotation


  • Suitable fasteners for general and special forms of fasteners.
  • The ability to quickly test at 360 ° rotation of the tested products.
  • Advanced telecentric lens is equipped with a parallel illumination helps avoid visual defects.
  • Automatic control, without setting up the necessary stages.
  • Optical and magnetic method is suitable for high-precision positioning.
  • Submission of data statistical control of production flow for the integrated analysis of the quality of the production process.



Parameters to be checked

Parallel facesParallel anglesThe width of the headThe height of the headThe angle of the cylindrical head with a rounded end
Width / Height of washersThe length of the shankRadiusThe outer / inner diameter of the threadThe angle of the tip
The size of the thread pitchThe angle of the threadThe effective diameter of the threadShank diametertotal length


Specifications

  • Accuracy test: ±10 microns
  • Accuracy at re-inspection: ±5 microns
  • Inspection speed: 30 ~ 300 sec / unit
  • Equipment weight net / gross: 300 / 430 kg
  • Dimensions equipment : 1000 / 720 / 1730
  • Dimensions of the machine after the installation: 1200 / 920 / 2060


Application area

  • The height of the head: 3 ~ 12 mm
  • The diameter of the head: 5 ~ 25 mm
  • The length of the screws (with the length of the head): 10 ~ 135 mm
  • outer screw diameter: 3 ~ 18 mm




CONTACT US:
Copyright © 2007 - 2024 Rost Group & Technology Co., Ltd 
(coordinator and exclusive representative)