TMA Thread rolling machine for stud production. Features of the thread rolling automatic machine. Technical data of the thread rolling machine for studs. Hydraulic machine with feeding system of transmission type for thread rolling. Thread rolling equipment. Thread rolling equipment for bolt, nuts, screws, self-tappers. Thread rolling equipment for studs, rivets, tubes, special parts, thin products with non standard profile. Taiwan equipment on Global market.
 tel. +886-2-278-45675
 fax.+886-2-278-45676
 e-mail:      info@rgt.tw

THREAD ROLLING MACHINES FOR PINS


THREAD ROLLING MACHINE FOR STUD PRODUCTION

Thread rolling machines are designed for the production of threaded rods, standard DIN 525, DIN 835, DIN 938, DIN 939, DIN 975, DIN 976-1, DIN 976 and others; thread rolling on hydraulic-type rods with transverse feed and pass feed as standard.

ДThe hydraulic feed pressure is adjustable from 0.5 tons to meet all production needs. On some models, the lateral feed cycle times are controlled by a timer and a feed delay switch. This facilitates rolling thin and coarse shapes with simple adjustment. On request, options for a semi-automatic and fully automatic loading system, a pedal control system and electric reverse locks are available. The equipment is particularly well suited for the manufacture of long screw threads and fine threads, spline, worm and gear for components of machines and equipment, tools, motorcycles, construction equipment, automobile parts, etc.

thread rolling machine for studs



Video threading on studs



Features of the thread rolling automatic machine

Standard equipment is represented by equipment for rolling a hydraulic type thread with transverse feed and feed to the passage.

  • 1/8 hp coolant pump
  • 3 hp hydraulic pump
  • Tool box
  • Operation manual
  • Supply voltage: 3ph 50Hz 380V
  • Speed: 24, 38, 52, 78 rpm
  • Thread rolling standard Ø150 х Ø54 х 70 length
  • 70 mm roller knife
  • Semi-automatic or automatic feeder


Technical data of the thread rolling machine for studs

Workpieces to be machined Outer diameter 6 - 35 mm
Thread pitch 0.75 - 4.0 P
Maximum length Cross feed and pass feed
Thread rolling rollers Thread rolling speed 24, 38, 52, 78 rpm
Max outer diameter 150 mm
Inner diameter 54 mm
Maximum width 100 mm
Maximum distance between spindle centers 170 mm
Minimum distance between spindle centers 120 mm
Maximum Rolling Force 17 tons
Productivity (meters per minute) 1.5
Engine Thread rolling spindle 7.5 hp
Hydraulic pump 3 hp
Coolant pump 1/8 hp
Net weight 1650 kg
Gross weigh 2000 kg
Floor space 1800 x 1350 mm
Packaged equipment dimensions (L)2030 x (W)1490 x (H)1510 mm


HYDRAULIC MACHINE WITH FEEDING SYSTEM OF TRANSMISSION TYPE FOR THREAD ROLLING

ROLLING THREADS EQUIPMENT ON PIN

Model RG-32 with standard accessories

Product Dimensions: M6, M8, M10, M12 х 1m
Performance: 52.10 tons per month for M6
86.18 tons per month for M8
128.26 tones for M10
119.42 tones for M12
Spindle motor: 10 HP
Cooling: 1/8 HP
Thread rollers: 180 mm outer diameter (maximum outer diameter 200mm)
Pitch: 0.75-4OP / 40-6TPI
Maximum length of rolling: not restricted under the system of through feeding
The rotational speed of the rollers: 240 rev / min for M6, M8. M10, about 160. min for M12
Maximum center distance: 177 mm
Minimum spacing: 120 mm
Distance from table surface to spindle-profile roller: 130 mm
Maximum pressure rolling (adjustable): 22 tons
Machine weight: 1200 kg
Equipment Dimensions: 1100 х 1100 х 1450 mm

Standard accessories: 2 sets of thread rollers 2 diameter sizes, complete hydraulic system with pressure gauge and device against overload, the electrical equipment with control of security, cooling system, mud shield, safety cover, foot brake, a box of tools for adjustment.

Automatic loading and unloading system.


Model RG-32 with standard accessories

Product Dimensions: M14, M16, M20, M24, M30 х 1m
Performance: 79,348 tons per month for M14 x 80 min,
89,457 tons for M16 x 80 min,
69.80 tons for M20 x 40 rpm,
100.50 tons for M24 x 40 rpm,
72.79 tons for the M30 x 20 rpm
Spindle motor: 15 HP
Cooling: 1/8 HP
Thread rollers: 180 mm outer diameter (maximum outer diameter 200 mm)
Pitch: 0.75-4OP / 40-6TPI
Maximum length of rolling: not restricted under the system of through feeding
Maximum center distance: 177 mm
Minimum spacing: 120 mm
Distance from table surface to spindle-profile roller: 130 mm
Maximum pressure rolling (adjustable): 22 tons
Machine weight: 1200 kg
Equipment Dimensions: 1100 х 1100 х 1450 mm

Standard accessories: 5 sets of thread rollers for each size, full hydraulic system with pressure gauge and device against overload, the electrical equipment with security control, cooling system, mud shield, safety cover, foot brake, a box of tools for adjustment.

Automatic loading and unloading system.



Model RG-32 with standard accessories

Product Dimensions: M6, M8, M10, M12 х 2m
Performance: 52.10 tons per month for M6
86.18 tons per month for M8
to 128.26 tones for M10
119.42 tones for M12
Thread rollers: 180 mm outer diameter (maximum outer diameter 200 mm)
Pitch: 0.75-4OP / 40-6TPI
Maximum length of rolling: not restricted under the system of through feeding
Cooling: 1/8 HP
Spindle motor: 10 HP
Maximum center distance: 177mm
Minimum spacing: 120 mm
Distance from table surface to spindle-profile roller: 130 mm
Maximum pressure rolling (adjustable): 22 tons
Machine weight: 1200 kg
Equipment Dimensions: 1100 х 1100 х 1450 mm

Standard accessories: 2 sets of thread rollers for each size, full hydraulic system with pressure gauge and device against overload, the electrical equipment with security control, cooling system, mud shield, safety cover, foot brake, a box of tools for adjustment.

Automatic loading and unloading system.


Model RG-32 with standard accessories

Product Dimensions: M14, M16, M20, M24, M30 х 2m
Performance: 79,348 tons per month for M14 x 80 min,
89,457 tons for M16 x 80 min,
69.80 tons for M20 x 40 rpm,
100.50 tons for M24 x 40 rpm,
72.79 tons for the M30 x 20 rpm
Spindle motor: 15 HP
Cooling: 1/8 HP
Thread rollers: 180 mm outer diameter (maximum outer diameter 200 mm)
Pitch: 0.75-4OP / 40-6TPI
Maximum length of rolling: not restricted under the system of through feeding
Maximum center distance : 177 mm
Minimum spacing: 120 mm
Distance from table surface to spindle-profile roller: 130 mm
Maximum pressure rolling (adjustable): 22 tons
Machine weight: 1200 kg
Equipment Dimensions: 1100 х 1100 х 1450 mm

Standard accessories: 5 sets of thread rollers for each size, full hydraulic system with pressure gauge and device against overload, the electrical equipment with security control, cooling system, mud shield, safety cover, foot brake, a box of tools for adjustment.

Automatic loading and unloading system.



RETURN TO MAIN PAGE EQUIPMENT FOR THREAD ROLLING



TOP