TMA Continuous furnace for carburizing, hardening and tempering. Endothermic type gas generator & its automatic temperature control panel. Features & Equipment configuration of the Endothermic Type Gas Generator. Equipment Configuration. Features of Endothermic Type Gas Generator. Product Appearance of the Generator of Endogas Production (with Automatic Temperature Control Panel). Gas Reforming Theory. Specification of the Endothermic Gas Generator with Automatic Temperature Control Panel. Parts of Endothermic Gas Generator. Taiwan equipment on Global market.
 tel. +886-2-278-45675
 fax.+886-2-278-45676
 e-mail:      info@rgt.tw

CONTINUOUS FURNACE FOR CARBURIZING, HARDENING AND TEMPERING


To see the specification of your hardware, click on the appropriate section.



Furnace line for heat treatment of conveyer type



Features & Equipment configuration of the Endothermic Type Gas Generator

the Endothermic Type Gas Generator with automatic temperature control panel

Equipment Configuration

Shielding gas generator for endogas production with automatic temperature control panel RG-801 consists of the following components:

  • Gassing panel: gas / air and piping.
  • Air intake by fan to ensure better gas combustion.
  • Built-in electric heating chamber.
  • Decomposing retort insert with catalyst.

Features of Endothermic Type Gas Generator

  • Gas control with protection system, safe and durable for use, stable control on dew point control with precise indication, available to be connected with CO2 controller for auto control purpose.
  • The system is the most advanced technology, created in cooperation with the professional company in USA.
  • The main parts & devices are imported from USA & Japan.
  • The air cooling system can improve many issues that original water-cooling system has & can reduce the high cost of cooling system which is required to be changed by blocked problem.
  • The ratio of air-enriched gas is automatically adjusted, thus avoiding manual adjustment. Additionally, it can helps to reduce the costs of periodical change of expensive part of mixing pump blades & cut costs for regular maintenance for mixing pump.
  • The Endo-gas generator has a standard computer system.
  • Heater's design with high efficiency, and the furnace can be opened for convenient maintenance and repair purpose.
  • Reserved connectors for simple and easy cleaning the trash inside the pipe.


Product Appearance of the Generator of Endogas Production RG-801 (with Automatic Temperature Control Panel)

the Generator of Endogas Production with Automatic Temperature Control Panel



Gas Reforming Theory

Gas Reforming Theory


Specification of the Endothermic Gas Generator with Automatic Temperature Control Panel


Model Gas production capacity, m3/h Power, kW Outer dimensions, mm
Width Height Length
RG-801-A 15 34-42 1530 2750 2200
RG-801-1 20 34-42 1530 2750 2200
RG-801-2 25 34-42 1530 2750 2200
RG-801-3 30 34-42 1530 2750 2200
RG-801-4 35 34-42 1530 2750 2200
RG-801-5 45 34-42 1530 2750 2200
RG-801-6 55 34-42 1530 2750 2200
RG-801-7A 75 50-55 1800 2750 2500
RG-801-7 75 50-55 1800 2750 2500
RG-801-8 75 50-55 1800 2750 2500


Parts of Endothermic Gas Generator

1 Gas fire curtain 1 unit
2 Catalyzer protecting barrel, SUS310S heat-resisting steel: 1 pcs. (Made in Japan)
3 One full set of gas generator parts (Made in USA) includes: Blower, a full set of flow rate control system, Human-machine control interface (HMI), atmosphere control, Human-machine (HMI) record function - temperature, flow, ratio, atmosphere record
4 Gas generator pipe (1 unit) includes: Emergency shut-off valve, gas low-voltage switch, pressure modulator, safety valve (imported from abroad)
5 Heating element: spring type heater (Made in Japan)
6 Automatic annunciated lamp: 1 unit (Made in Japan)
7 ON-OFF switch, 3 phase 380V × 50kW: 1 set. (Made in Japan)
8 Catalyst 50 kg (Made in Japan)
9 Cooling system: Air-cooling type
10 Gas source: use liquid gas/natural gas (provided by the buyer)
11 Carbon potential control system: 1 unit (Made in USA)




TOP