CONTINUOUS FURNACE FOR CARBURIZING, HARDENING AND TEMPERING

GENERAL INFORMATION ABOUT HEAT TREATMENT CONTINUOUS FURNACE FOR FASTENERS PIT TYPE FURNACE FOR WIRE ANNEALING BELL TYPE FURNACE FOR WIRE ANNEALING CHAMBER FURNACES FOR WIRE ANNEALING VACUUM FURNACE CRUCIBLE FURNACE GENERATORS FOR HEAT TREATMENT SYSTEM

To see the specification of your hardware, click on the appropriate section.

AUTOMATIC CARBON POTENTIAL CONTROL SYSTEM

Furnace line for heat treatment of conveyer type

Application & Features of Carbon Potential Control System

The equipment to control the carbon potential (C/P) of atmosphere for hardening furnace automatically.

The principle of operation is based on system of automatic recognition of O2 BARBER COLMAN carbon, error control ±0.03% (carbon). Manufacturing of the United States.

Carbon Potential Control System Equipment Composition

Automatic Carbon Potential Control System composed of:

Oxygen probe
Solenoid Valve
Recording system (temperature, carbon, gas flow)
Burning air standard piping for air combustion.

The equipment is available in the following versions: One-Point type RG-802A, Double-Point type RG-802B and Three-Point type RG-802C (RG802A + B)

Double-Spot type Automatic Carbon Potential Control System RG-802B O2

Double-Spot type Automatic Carbon Potential Control System manufactured in USA. One spot for RX Generator RG-801, second spot for Quenching Furnace RG-805.

Width	700 mm
Height	1800 mm
Diameter	700 mm
Power supply	220-240В х 3 phase х 50-60 Hz

Carbon Potential Controller AC20 (made in USA): 2 pcs
K-type oxygen sensor (made in USA): 2 pcs
Air supply system: 1 unit
Digital temperature display: 2 units
Recorder: 1 set

Three-Spot type Automatic Carbon Potential Control System RG-802C O2

Three-Spot type Automatic Carbon Potential Control System with electromagnetic valve (two spots for control of Quenching Furnace RG-805 and one spot for control of RX Generator RG-801) model RG802A+B manufactured in USA.

Components

1	C/P controller: Model: AC20 (SSI, made in USA)	2 sets
2	Recorder: Model: OHKURA RMIOC (Japan) × 1set Type: paper (chart) type Points: 6 points
3	Oxygen probe: Model: Gold probe (SSI, made in USA) × 2 sets Type: K type Application: measure the oxygen of atmosphere
4	Air pump: Model: HK-80L Power: AC100V × 1P × 50 Hz Function: supply the reference air & burn-out air for oxygen probe Pressure: 0.15kg/cm² Max output: 80 liters/min
5	Voltage stabilizer: 110 V х 500 W	1 комплект
6	MV meters	2 sets
7	Temperature display	2 sets
8	Flow meters: Reference air flow meter (SSI, made in USA) 2 sets Burn-out air flow meter: (SSI, made in USA) 2 sets