TMA Cold forming equipment for fasteners, parts and hardware. Cold forming equipment for bolt, nuts, screws, self-tappers, nails, pins, rivets, long products. Washer press. Open die header. Taiwan equipment on Global market.
 tel. +886-2-278-45675
 fax.+886-2-278-45676
 e-mail:      info@rgt.tw

COLD FORMING EQUIPMENT FOR SELF-TAPPERS AND SCREWS


The table of conformity of products and equipment

Product Specification


Self-tappers with countersunk head with single thread

Flat head screw with single thread
Self-tappers with
countersunk head
with single thread
The heading of the blank + thread rolling
RG-10C + RG-15THC
Weight 1000 pcs. /kg.
3,5х19 1,15
3,5х25 1,35
3,5х32 1,62
RG-15C + RG-15THC  
3,5х35 1,79
3,5х41 2,02
3,5х45 2,2
3,5х51 2,45
3,5х55 2,68
3,5х65 3,56



Self-tappers for metal with a hemispherical head, and a sharp tip

Snap head screw with washer and sharp tip for metal work
Self-tappers for metal with a hemispherical head, and a sharp tip
The heading of the blank + thread rolling
RG-15C + RG-15THC
Weight 1000 pcs. /kg.
4,2х13 1,54
4,2х14 1,64
4,2х16 1,75
4,2х19 1,85
4,2х25 2,23
4,2х32 2,71
4,2х41 3,24
4,2х51 4,23




Self-tappers with countersunk head for wood and plasterboard

Flat head screw for
wooden board work

Self-tappers with countersunk head for
wood and plasterboard
The heading of the blank + thread rolling
RG-10C + RG-15THC
Weight 1000 pcs. /kg.
3,5х12 0,61
3,5х16 0,75
3,5х20 0,91
3,5х25 1,12
3,5х30 1,30
RG-15C + RG-15THC  
3,5х35 1,50
3,5х40 1,75
3,5х45 2,02
3,5х50 2,28



Self-tappers for metal with a hemispherical head, and drill

Snap head screw with washer
and drill for metal work

Self-tappers for metal with a
hemispherical head, and drill
The heading of the blank + Rolling+ Forming drill
RG-15C +RG-15THC + RG-235
Weight 1000 pcs. /kg.
4,2х13 1,82
4,2х14 1,91
4,2х16 2,08
4,2х19 2,22
4,2х25 2,61
4,2х32 3,12
4,2х41 3,81
4,2х51 4,61



Self-tappers with countersunk head with double thread

Flat head screw with double thread
Self-tappers with countersunk head with double thread
The heading of the blank + thread rolling
RG-10C + RG-15THC
Weight 1000 pcs. /kg.
3,5х19 1,15
3,5х25 1,35
3,5х32 1,62
RG-15C + RG-15THC  
3,5х35 1,79
3,5х41 2,02
3,5х45 2,2
3,5х51 2,45
3,5х55 2,68
3,5х65 3,56



Note:

  Dimensions marked yellow, we recommend to use equipment model RG-10C + RG-15THC
  Dimensions marked pink, we recommend to use equipment model RG-15C + RG-15THC
  Dimensions marked green, we recommend to use equipment model RG-15C + RG-15THC + FA-235
   
Download table in pdf format



Equipment Specification

Cold heading machine in protective housing Model RG-10C

Cold heading machine in protective housing


Max. blank diameter 2-4 mm
Max.blank length 32 mm
The stroke length of the slide 58 mm
Performance 190-220 pcs./min.
The diameter of the core matrix 30 mm
The diameter of the cutting matrix 15 mm
Punch of the 1st position 24 mm
Punch of the 2-position
20 mm
Power of main engine
2 hp
Oil pump
¼ hp
Overall dimensions, LхWхH
185x130x200 сm
Net weight
1160 kg
Gross Weight

1360 kg



Cold heading machine in protective housing Model RG-15C

Cold heading machine in protective housing


Max. blank diameter 4-5 mm
Max.blank length 64 mm
The stroke length of the slide 92 mm
Performance 150-180 pcs./min.
The diameter of the core matrix 34.5 mm
The diameter of the cutting matrix 19 mm
Punch of the 1st position 31 mm
Punch of the 2-position 31 mm
Power of main engine 2 hp
Oil pump ¼ hp
Overall dimensions, LхWхH 198x130x175 сm
Net weight 1930 kg
Gross Weight 2130 kg



Thread Rolling Machine in protective housing Model RG-15THC

Thread Rolling Machine in protective housing


Max.blank length 64 mm
Performance 200-300 pcs./min.
Dice size 25x70x76~90
25x70x90~105
Power of main engine 5 hp
Overall dimensions, LхWхH 197x155x167 сm
Net weight 1650 kg
Gross Weight 1800 kg



Equipment for the formation of the drill Model RG-235

Equipment for the formation of the drill


Max. blank diameter 2.8-6.3 mm
Max.blank length 9.15-220 mm
Performance 100-500 pcs./min.
Dice size 25x102x127~140
Power of main engine 10 hp /7.5 kW/6 phases
Control over speed INVERTER
Control Mode Automatic (programmable logic controller)
Brake system pneumatic type
Blank feeding Vibrating hopper, Ø712 mm
Overall dimensions, LхWхH 200x240x200 сm
Overall dimensions in packing, LхWхH

215x255x215 сm

Net weight 2520 kg
Gross Weight 2845 kg


Advice on materials for the production of self-tappers

For the production of self-tappers wire material SAE 1022 and SAE 1018 is recommended. Non marking the end of 22 and 18 indicate the carbon content of steel in hundredths. At a high angle threading it is recommended to apply a material with a high carbon content.


Wire Features:

Chemical composition

  C.Max Si.Max Mn.Max P.Max S.Max Al.Max
1022 0.18-0.23 0.10 0.70-0.90 0.030 0.050 0.020
1018 0.15-0.20 0.10 0.60-0.90 0.030 0.050 0.020

Mechanical characteristics

  Diameter, mm Tensile strength, kg/mm2 Hardness, HB
1018 3.5 42-50 135-165
1018 2.75 44-54 145-175
1022 3.5 42-51 135-170
1022 2.75 45-55 145-175


SPAX SELF-TAPPERS

Self-tappers SPAX countersunk head, yellow, flattened thread, TORX
Self-tappers SPAX countersunk head, yellow, flattened thread, TORX
Self-tappers SPAX TORX for wooden structures with pressure pad Self-tappers SPAX TORX for wooden structures with pressure pad
Self-tappers SPAX TORX for wooden structures with pressure pad
Self-tappers SPAX countersunk head for prefabricated wooden structures TORXSelf-tappers SPAX countersunk head for prefabricated wooden structures TORX
Self-tappers SPAX countersunk head for prefabricated wooden structures TORX
Self-tappers SPAX universal, countersunk head, full thread Self-tappers SPAX universal, countersunk head, full thread
Self-tappers SPAX universal, countersunk head, full thread
  • 4CUT- The tip: without pre-drilling. Effectively reduces the process of differentiation. Tetra separates the fibers.
  • Optimal wave profile: Up to the tip. Fast and reliable self-tappering.
  • T-STAR plus: tight fit-bit key ensures comfortable use for example when working overhead.
  • 4CUT- Cutter: With self-tapper length from 160 mm greatly reduced tightening torque, up to 60% and more.
  • MULTI-head: A clear drowning in sweat. Fraser in wood and brakes on metal.
SPAX-D. The self-tapper for wooden terraces, stainless steel, for any wood


  • Reliable fit wood flooring on the base
  • Snug fit timber / effect clutches
  • Easy self-tapper driving and solid timber



Self-tapper SPAX threaded rod


  • Increased transverse stretching at high wooden building structures.
  • Due to the large size (800 mm - 2.200 mm), they are the ideal product to replace the glued metric threaded rods.


Self-tapper SPAX-S Universal round head Self-tapper SPAX-S Universal round head
Self-tapper SPAX-S Universal
round head
Self-tapper universal POZIDRIV, round headSelf-tapper universal POZIDRIV, round head
Self-tapper universal POZIDRIV,
round head
Self-tappers SPAX round with a press washer, full thread, PZ Self-tappers SPAX round with a press washer, full thread, PZ
Self-tappers SPAX round with a press
washer, full thread, PZ
  • Versatility: application in the wood, plastic, metal thin sheet.
  • The multifaceted head Multi: especially for wood and metal plates.
  • The patented wave-like profile: quick and easy : processing, the soft mode in accordance with the material.
  • Four-sided conical end 4 CUT: no cleavage even at small distances from the edge, instant capture without pre-drilling.


Self-SPAX-M countersunk head, flattened thread, TX-plusSelf-SPAX-M countersunk head, flattened thread, TX-plus
Self-SPAX-M countersunk head, flattened thread, TX-plus


  • Self-tappering without buckling and splitting the material on the front side as well as when self-tappering in the edge zone of the plate.
  • The special geometry of the self-tapper ensures reliable and easy self-tappering without pre-drilling MDF boards and thin chipboard.
  • The special design of the tip ensures precise self-tappering CUT.
  • Countersunk head with elongated ribs are milled easily and quickly enters the material.


Self-tappers SPAX for the assembly of wooden structures with flat head TORX Self-tappers SPAX for the assembly of wooden structures with flat head TORX
Self-tappers SPAX for the assembly of wooden structures with flat head TORX


Self-tappers for Sandwich panels

Self-tappers for sandwich panels on wood Self-tappers for sandwich panels on wood
Self-tappers for sandwich panels on wood
Self-tappers for sandwich panels on wood Self-tappers for sandwich panels on wood
Self-tappers for sandwich panels on metal


  • Purpose: used to direct mounting sandwich - panels on Steel and wooden structures.
  • Material: Self-tapper made from Hardened Carbon steel, surface galvanized.
  • Design features: the self-tapper has drilled tip, hex head. Under the head of the self-tapper thread diameter is 6.3mm, the main thread - 5.5mm diameter. Self-tapper is equipped with washer with a seal of EPDM. 19mm diameter washers.
  • Installation: pre- drilling is not required. The minimum Width of steel stapling structures is 1.5 mm. The maximum thickness steel structures, that made drilling - 6mm for PT3 and 12mm for PT5.



ROOFING SELF-TAPPERS

Roofing self-tappers with washer and rubber gasket EPDM, painted according to RALRoofing self-tappers with washer and rubber gasket EPDM, painted according to RAL
Roofing self-tappers with washer and rubber gasket EPDM, painted according to RAL
Roofing self-tappers with washer and rubber gasket EPDM, painted according to RALRoofing self-tappers with washer and rubber gasket EPDM, painted according to RAL
Roofing self-tappers, galvanized with washer and rubber EPDM gasket


  • Purpose: used for fixing metal and sheeting to wooden and metal roof structures.
  • Material: Made from galvanized steel gasket from rubber EDPM.
  • Design features: Hexagon head washer with rubber seal. Drilled tip. Rubber gasket serves for waterproofing.
  • Options: self-tappers 5.5 mm and 6.3 mm intended to fixing to metal constructions, self-tapper of 4.8 mm has reduced drill and applicable to fixing to wood structures.



STAINLESS STEEL SELF-TAPPERS

Self-tappers with a round head and the pointed end of stainless steel А2 DIN 7981 Z   A2Self-tappers with a round head and the pointed end of stainless steel   А2 DIN 7981 Z A2
DIN 7981 A2
Self-tappers with a round head and the pointed end of stainless steel
Self-tappers with countersunk head and sharp point made of stainless steel А2 DIN 7982 Z A2Self-tappers with countersunk head and sharp point made of stainless steel А2   DIN 7982 Z A2
DIN 7982 A2
Self-tappers with countersunk head and sharp point made of stainless steel
Self-tappers with hexagon head and the sharp end of stainless steel А2 DIN 7976   A2Self-tappers with hexagon head and the sharp end of stainless steel А2 DIN   7976 A2
DIN 7976 A2
Self-tappers with hexagon head and the sharp end of stainless steel
Self-tappers stainless steel metal with a cylindrical head and hexagon socket steel DIN912_A2
DIN 912 A2
Self-tappers stainless steel metal with a cylindrical head and hexagon socket steel
  • Purpose: used to fixing steel and other sheet materials (plywood, hardboard and t. d.) to metaland wood bearing structures.
  • Material: Made from steel, surface galvanized.
  • Design features: Head semicircular from hemisphere / secret / hex / cylindrical slot cross-Phillips / internal Hex tip sharp.
  • Installation: pre-stake the place of attachment, if necessary drill. Tighten the self-tapper by a key or a special nozzle on the drill.


SELF-TAPPERS FOR WINDOWS

Self-windowed JD10 sharp end, countersunk head, yellow zinc. Self-windowed JD10 sharp end, countersunk head, yellow zinc.
Self-windowed JD10 sharp end, countersunk head, yellow zinc
Self-windowed JD20R drill, countersunk head, fine thread, yellow zinc Self-windowed JD20R drill, countersunk head, fine thread, yellow zinc
Self-windowed JD20R drill, countersunk head, fine thread, yellow zinc
Self-windowed JD22 drill, round head, yellow zinc, fine thread. Self-windowed JD22 drill, round head, yellow zinc, fine thread.
Self-windowed JD22 drill, round head, yellow zinc, fine thread
Self-windowed JD23 drill, countersunk head, yellow zinc Self-windowed JD23 drill, countersunk head, yellow zinc
Self-windowed JD23 drill, countersunk head, yellow zinc
  • Purpose: designed for mounting the metal frame to the PVC window profile.
  • Material: Made from steel surface It has protective Floor: yellow zinc.
  • Design features: tip sharp or drill-type, head semicircular or the secret, Zenko from PhillipsSlot (Philips N2), a step Thread Frequently.


FEX-RS
Louver self-tapper with needle point for fixing the louver by clamping


  • Purpose: Mount clamping profile strips.
  • The tip needle does not require pre-drilling of the plastic profile.
  • Acute thread up to the head.
  • Belt pack (optional).



SELF-TAPPERS CONCRETE

Self-tapper on concrete (nog) Self-tapper on concrete (nog)
Self-tapper on concrete (nog)


SELF-TAPPERS DRYWALL

Self-tappers with countersunk head Drywall, a rare pitch of the thread, oxidizedSelf-tappers with countersunk head Drywall, a rare pitch of the thread, oxidized
Self-tappers with countersunk head Drywall, a rare pitch of the thread, oxidized
Self-tappers with countersunk head Drywall, frequent thread pitch, oxidized Self-tappers with countersunk head Drywall, frequent thread pitch, oxidized
Self-tappers with countersunk head Drywall, frequent thread pitch, oxidized


  • Purpose: for fastening drywall to wooden structures and metal profiles up to a thickness of 0.9 mm..
  • Material: Made from steel surface oxidized.·
  • Design features: secret head and cruciform Slot (Philips N2).



METAL SELF-TAPPERS

Self-tappers with a round head, drill and pressure pad Self-tappers with a round head, drill and pressure pad
Self-tappers with a round
head, drill and
pressure pad
Self-tappers for metal with a round head, pressure pad, sharp tip, cross slot (Philips N2)Self-tappers for metal with a round head, pressure pad, sharp tip, cross slot (Philips N2)
Self-tappers for metal with a round
head, ressure pad, sharp tip,
cross slot (Philips N2).


  • Purpose: used for fixing steel and other sheet materials to metal and wooden joists..
  • Material: made from steel surface galvanized or oxidized.
  • Design features: Head is performed with round-shaped head, with pressure pad and has cross Slot Phillips N2. Tips of self-tappers can be sharp (fastening Sheet metal to 0.9 mm without preliminary drilling).



Self-tappers with a drill and countersunk head DIN 7504PSelf-tappers with a drill and countersunk head DIN   7504P
DIN 7504P
Self-tappers with a drill and
countersunk head
Self-tappers with a drill and hex head DIN 7504К    DIN 7504KSelf-tappers with a drill and hex head DIN 7504К    DIN 7504K
DIN 7504K
Self-tappers with a drill
and hex head
Self-tappers with a drill and a round head DIN 7504N   DIN 7504NSelf-tappers with a drill and a round head DIN 7504N   DIN 7504N
DIN 7504N
Self-tappers with a drill
and a round head
КлоP   (Self-tappers with a drill and a round head DIN 7504N   phosphated) DIN 7504NКлоP   (Self-tappers with a drill and a round head DIN 7504N   phosphated) DIN 7504N
DIN 7504N
Bug (self-tapper with a drill and
a round head, phosphated)


Self-tappers for metal with a round head DIN 7981 DIN 7981Self-tappers for metal with a round head DIN 7981 DIN 7981
DIN 7981
Self-tappers for metal with a round head
DIN 7983
Self-tappers for metal, full thread
Self-tappers for metal countersunk head DIN 7982 DIN 7982Self-tappers for metal countersunk head DIN 7982 DIN   7982
DIN 7982
Self-tappers for metal countersunk head
Self-tapper with hex head DIN 7976Self-tapper with hex head DIN 7976
DIN 7976
Self-tapper with hex head
  • Purpose: used to fixing steel and other sheet materials (plywood, hardboard and t. d.) to metaland wood bearing structures.
  • Material: Made from steel, surface galvanized.
  • Design features: Head cylindrical / secret from hemisphere, hexagon, slotted crosswise Phillips, tip sharp.
  • Installation: pre-stake the place of attachment, if necessary drill. Tighten the self-tapper by a key or a special nozzle on the drill.


UNIVERSAL SELF-TAPPERS

Self-tappers with countersunk head Drywall, frequent thread pitch, oxidized Universal Self-tappe, flat head, full thread, PZ
Universal Self-tappe,
flat head, full
thread, PZ
Self-tappers with hex head, a rare carving, Self-tappers with hex head, a rare carving,
DIN 571
Self-tappers with hex head, a rare carving, "grouse" "глухарь"
DIN 95DIN 95
DIN 95
Self-tappers Brass flattened thread, oval head, direct slot


MICRO SELF-TAPPERS

self-tappers
Micro self-tappers M0.8
Fastener for electronics
Fastener for electronics
Micro self-tappers phosphated
Micro self-tappers phosphated
Micro self-tappers
Micro self-tappers

return to main page equipment for cold heading



TOP