tel. +886-2-278-45675 (1-30)  fax.+886-2-278-45676  e-mail:     info@rgt.tw

WIRE / BAR STRAIGHTENING AND CUTTING

 

STEEL WIRE STRAIGHTENING AND CUTTING MACHINE RG10-16 Series

This model of straightening and cutting equipment is designed for the production of rebar Ø10-16 mm according to the "coil to rod" pattern.

Wire Straightening and Cutting Machine Wire Straightening and Cutting Machine Wire Straightening and Cutting Machine


Technical Advantages

  • Suitable for straightening and cutting cold-rolled round bar/ ribbed bar, hot-rolled round/ ribbed bar.
  • High cutting accuracy: length tolerance ≤±1 mm.
  • High straightness: ≤2 mm/m.
  • 4 working speeds: 70 m/min, 100 m/min, 130 m/min and 150 m/min.
  • Normally working speed: 130 m/min. If you finish product length less than 2 m, suggest 70 - 100 m/min.
  • Intelligent control: the machine is controlled by PLC Siemens, touch screen Weinview and servo motor EURA Drives servo. Easy operation and working reliable.
  • Low failure rate: due to the fine processing of parts and strict quality control, after installation and debugging, under normal working conditions, it can maintain trouble-free operation for a long time.
  • World Advanced & Leading technology: machine straightening and cutting technology.


Technical Data

ModelRG10-16RG10-16S
Steel Wire DiameterØ10 - 16 mm cold rolled & hot rolled round bar/ rebar
Wire Length0.6 - 12 m, adjustable or customized
Rebar Collect Stacker12 m
Length Tolerance≤±1 mm
Straightness≤2 mm/m
Working Speed70 - 100 - 130 m/min
Load capacity of Pay-off3000 kg
Straightening ModeRotating Straightening Drum
Wire Feeding ModeElectric Motor
Total Motor Power45+7.5 kW55+7.5 kW
Cutting ModeServo Motor Cutting
Servo Motor Power7.5 kW
Control ModePLC (Siemens)
Steel Wire StrengthTensile Strength ≤550 MPa Low Carbon Steel Wire
Electric VoltageThree Phase, 380V, 50Hz
Power Supply LineCross-sectional Area 6 mm2, Material: Copper Material
Air consumptionWorking Pressure 0.6 MPa, Flow Rate 18 m3/h (0.3 m3/min)
Working Line Size (L×W×H)30×3×2 m
Gross Weight5500 kg5800 kg




REBAR STRAIGHTENING AND CUTTING LINE RG5-12 Series

This rebar straightening and cutting machine is designed for the production of reinforcing bars Ø5-12 mm according to the "coil-to-rod" pattern.

Rebar Straightening and Cutting Line Rebar Straightening and Cutting Line


Technical Data

ModelRG5-12
Rebar diameterØ5 - 12 mm
Cut-off Length0.8 - 12 m (сould customized according to client’s requirements)
Rebar Collect Stacker12 m
Length accuracy≤±2 mm
Length adjust modeManual / Automatic
Pulling speed120 - 150 m/min
Load capacity of Pay-off3000 kg
Cutting ModeServo Shear
Control ModePCC (Programmable Computer Controller)
Speed Controlsteplessly adjustable
Tensile strength of materialσb = 210 - 650 MPa
Electric VoltageThree Phase, 380V, 50Hz
Total power46.5 kW
Dimension (L×W×H)2.6×1×1.98 m
Gross Weight3000 kg



WIRE / BAR STRAIGHTENING AND CUTTING MACHINE

straightening

This Wire/Bar Straightening and Cutting Machine utilizes the principle that the wire will be straightened while rotating at high speed and being drawn at the same time.

Wire Straightener and Cutter consists of two units of straightening roller and Set length & Cutter Seat. Metal is moved by a feeding roller, straightened by a straightening roller, and taken into the Set-Length & Cutter-Seat by Outlet Feeding Roller.

The set length & Cutter Seat consist of Thread Stripper and Cutting Arm. When Metal wire is taken into inlet feeding roller and revolve the straightening roller, a Counter will count and rule the cutting length. After cutting, the cutting rod makes the Thread Stripper move and the finished product falls into the collector.


WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S SERIES

wire straightening and cutting machine RGC-S12
WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S12
wire straightening and cutting machine RGC-S30
WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S30
wire straightening and cutting machine RGC-S25
WIRE / BAR STRAIGHTENING AND CUTTING MACHINE RGC-S25


Specification of Wire straightening and cutting Machine RGC-S Series

ModelWire DiameterWire Cut LengthSpeedPower Required
RGC-S9Ø5 - Ø91m – 12m80 m/min30HP/5HP/5HP
RGC-S12Ø8 - Ø121m – 12m120 m/min40HP/15HP/7-1/2HP
RGC-S20Ø12 – Ø161m – 12m80/56/38/24 m/min50HP/10HP
RGC-S25Ø16 – Ø251m – 12m23 m/min50HP/10HP/25HP
RGC-S30Ø20 – Ø301m – 12m15 m/min60HP/15HP/40HP/1HP(7X)


WIRE /BAR STRAIGHTENING AND CUTTING MACHINE RG-K SERIES

wire straightening and cutting machine


Wire / Bar Straightening and Cutting Machines are designed for straightening-measuring-cutting any kinds of metal wire/bar or non-metal wire/bar such as, steel bar for construction, welding rods, netting - wire, fan netting hanger, refrigerator netting, shopping basket, shoes rack, book stand, domestic fowls cage, record stand and the other kinds of steel wire etc.

The Wire/Bar Straightener and Cutter is easy to operate. You just need to fix the adjuster to the desired length, and feed the wire/bar into the machine. Then, the machine automatically produces straight wire/bar of uniformed length at a high speed.

Moreover, it rotates smoothly and noiselessly; it is precise in its measure and strong in its structure. During the operation, the feeding of wire/bar and the cutting action are ceaselessly continued by the shifting of a cutter cooperatively.



RG-K Series Wire straightening and cutting Machine Specifications

ModelRequired PowerWire diameterSpeedCut wire length
RG-K-11HP+1/2HPØ1.5mm~Ø3.5mm35m/min6 feet
RG-K-21HP+2HPØ3mm~Ø6mm35 m/min6 feet
RG-K-310HPØ5mm~Ø8mm35 m/min10 Feet
RG-K-42HP+20HPØ7mm~Ø12mm35 m/min20 feet
RG-K-52HP+20HP+3HPØ10mm~Ø15mm11m/min, 22 m/min, 34 m/min, 49 m/min20 feet



Hydraulic bending tools

Hydraulic bending tools
ModelBending AngleCurving AbilityWeight
НВВ-320~90°32 mm19 kg
НВВ-250~90°32 mm11.5 kg


Hydraulic cutting tools

Wire/rebar cutter
Wire/rebar cutter RGT16
Wire/rebar cutter
Wire/rebar cutter RGT20
Wire/rebar cutter
Wire/rebar cutter RGT32


Specifications
ModelElectric VoltageElectric CurrentCutting CapacityCutting speedCutting ForceWeightSize (L × W × H)
RGT16110V / 220V, 50/60Hz9A / 4.5AØ4 ~ Ø16 mm1.5 sec10 t7 kg340 × 107 × 236 mm
RGT2011A / 5.5AØ4 ~ Ø20 mm3 sec15 t13.5 kg416 × 116 × 220 mm
RGT3214A / 7AØ20 ~ Ø32 mm (standard cutter blades)
Ø4 ~ Ø20 mm (larger cutter blades)
6 sec55 t46 kg580 × 190 × 300 mm

Hydraulic cutting tools with rechargeable batteries

Hydraulic cutting tools with rechargeable batteries
Specifications
ModelCutting abilityWeightCutting speed
НСС-1313 mm4 kg2.5 sec
НСС-1616 mm4.5 kg
НСС-1919 mm5 kg


Hydraulic cutting tools

Hydraulic cutting tools
Specifications
ModelCutting abilityWeightCutting speed
НВС-30113 mm5.3 kg1.5 sec
НВС-31616 mm7.8 kg
НВС-1919 mm11.8 kg
НВС-2525 mm20 kg
НВС-3232 mm




CONTACT US:
Copyright © 2007 - 2024 Rost Group & Technology Co., Ltd 
(coordinator and exclusive representative)