tel. +886-2-278-45675 (1-30)  fax.+886-2-278-45676  e-mail:     info@rgt.tw

EQUIPMENT FOR WIRE CLEANING

 

RG-3800 SHOT BLASTING MACHINE FOR WIRE ROD

SHOT BLASTING MACHINE FOR WIRE ROD

The shot blasting machine is mainly designed for cleaning wire rods. The machine uses shot blasting cleaning process for descaling the surface of the wire and roughening the surface while also increasing treated metal’s resistance to corrosion. Compared to pickling line, shot blasting cleaning method is more effective, economic, and eco-friendly.


Comparison of the effectiveness of wire cleaning methods

Compared to the pickling method, shot blasting is more efficient , economical and environmentally friendly .

Shot blasting
Shot blasting
Pickling
Pickling


Features of Wire Rods Shot blasting Machine

The equipment uses a unique technology of having a rotating shutter (360°) and a double console crane for wire rod transportation, which significantly increases the production capacity of the equipment

In order to provide a better cleaning, during the shot blasting process the wire goes through a complex of operations: up-down rotation, left-right rotation, forward and reverse rotation. Additionally, the design of the equipment allows both inner and outer sides of the wire surface to get an even shot processing. After shot blasting the wire surface reaches the surface preparation standard of Sa 2.5 (very deep blast cleaning).


Wire specifications

Wire materialcarbon steel, structural steel, carbon tool steel, spring steel, bearing steel, high-speed tool steel, alloy tool steel
Wire diameterØ6,5 – Ø32 mm
Inner rod diameter (min)Ø800 mm
Outer rod diameter (max)Ø1500 mm

Maximum load of Wire Rods Shot blasting Machine RG-3800

Wire rod diameter6,5 - 8 mm10 - 16 mm18 - 28 mm30 mm and greater
Workpiece weightMax: 1000 kgMax: 2000 kgMax: 2400 kgMax: 2500 kg


Transportation method and Productivity

Transportation method: Transportation via double console crane (during shot blasting process console crane can operate in accordance with PLC)

Productivity: 3-6 coils per hour, depending on material quality, size and oxidation level

Effective length: ~3800 mm


Shot Blasting System

NoNameValueNotes
1Shot blasting turbineQty6 pcs 
Capacity6 × 32 = 132 kW
2Shot blasting chamberQty1 pcs 
4Bucket elevatorQty2 pcsGuomao Reducer Co., Ltd.
ReducerCompact gear reducer
Capacity2 × 4,0 = 8 kW
5Lower auger conveyorQty2 pcsGuomao Reducer Co., Ltd.
ReducerCompact gear reducer
Capacity2 × 2,2 = 4,4 kW
6Abrasive bead controllerQty6 pcs 
Control typeAdjustable
Control methodPneumatic
7Intermediate power144,4 kW. 


Shot blasting process and principle of operation

The machine is installed in accordance with wire characteristics on the rear and lateral sides of the chamber with six highly efficient shot blasting turbines. The wire is processed at a speed of 78 m/s.

    The equipment includes:
  • abrasive bead separation system
  • high-strength high-temperature belt type lift
  • horizontal conveyor
  • two-step cleaning and dust-removal system
  • automatic and manual machine interface control systems



CONTACT US:
Copyright © 2007 - 2024 Rost Group & Technology Co., Ltd 
(coordinator and exclusive representative)