Taiwan Metiz Alliance
Cold forming equipment for fasteners, parts and hardware. Cold forming equipment for bolt, nuts, screws, self-tappers, nails, pins, rivets, long products. Washer press. Open die header. Taiwan equipment on Global market.
tel. +886-2-278-45675
fax.+886-2-278-45676
e-mail:     info@rgt.tw

EQUIPMENT FOR SPECIAL PARTS COLD HEADING

 


TECHNICAL FEATURES OF THE EQUIPMENT FOR PARTS BOLTS AND NUTS PRODUCTION

Pneumatic clutch
and brake system provide
a quick heading
process
Motorized digital adjustment length with a screen on the control panel allows the operator to save time when changing tools (on demand)
Machines are equipped
with the gear
lever and the
cutting mechanism
Adjusting the length of the shank is carried out by handwheel of manual control with help of the camera controlling the length of ejection
The equipment supports three types of blanks feeding depending on the parameters of the heading
(on demand)
Motorized digital adjustment
rod blank length with
a screen on the operator
control panel
Wire winder is equipped with horizontal pointing and correct hydraulic mechanism, able to quickly and easily process heavy blanks
Motorized digital limiter adjustment allows the operator to quickly and accurately adjust the cutting length
(on demand)
frame
The frame provides absolute stability and a straight forward process of heading. Made of cast iron with nodular graphite grade JIS FCD 55. Holders of the matrix are made of stainless steel grade FCD 70, arranged parallel to each other and can be adjusted independently of each other. The equipment is switched off automatically in case of overload R.K.O.

tuv

 

Taiwan Metiz Alliance offers equipment for the production of special parts, bolts and nuts of various shapes and sizes. Production of parts is carried out on the equipment with 3, 4, 5, 6 and 7, 8 positional forging stations, able to shape parts of complex configuration. The system supports 4 workpiece feed mode (rectilinear, rotational, up / down, opened / closed, opening / closing rotational). Equipment heads fasteners ranging in size from M5 to M45, different mobile tool change. Modern technology allows the operator to precisely adjust the minimum error length of the cut, which saves time and maximize productivity. The equipment is completed with pneumatic clutch and brake systems, speed changing is controlled by inverter. Machines are reliable and low cost.

EQUIPMENT FOR PARTS BOLTS AND NUTS PRODUCTION

 

PRODUCTION. SPECIAL PARTS

Max. Cutting Diameter: 45 mm

These products are produced on equipment of RNP Series with 5, 6, 7-position forging stations

  • Max. Cutting Diameter: 45 mm
  • Max. cutting length: 180 mm
bolts_Max. Cutting Diameter: 34 mm

These products are produced on equipment of RNP Series with 5, 6, 7-position forging stations

  • Max. Cutting Diameter: 34 mm
  • Max. cutting length: 450 mm

 

TECHNICAL FEATURES OF THE EQUIPMENT FOR PARTS BOLTS AND NUTS PRODUCTION

    Specification of products (Nuts): DOWNLOAD
DOCUMENT
Press series RPF 3/4/5/6/7P
  • Product Size: Ø8х20 - Ø28х65
  • Performance: 95 - 200 pcs/min
DOWNLOAD DOCUMENT
Press series RBP 5/6/7/8P
  • The diameter of the cut: 7 - 34 mm
  • Cutting length: 55 - 450 mm
  • Performance: 35 - 180 pcs/min
DOWNLOAD DOCUMENT
Press series RNP 5/6/7P
  • The diameter of the cut: 7 - 45 mm
  • Cutting length: 40 - 180 mm
  • Performance: 50 - 180 pcs/min
DOWNLOAD DOCUMENT

 

Press series RBP-36B6SL

 

R&D