tel. +886-2-278-45675 (1-30)  fax.+886-2-278-45676  e-mail:     info@rgt.tw

COLD FORMING EQUIPMENT FOR NAIL PRODUCTION


Complete line for cold heading of nails, forming thread on nails and assembly of finished nails into coil for pneumatic nailing guns


Coiled Nails designed to improve fastening efficiency

Coiled Nails for Pneumatic Nail Gun

Drum nails for a pneumatic gun are used in industrial workshop work when assembling various wooden containers. Coiled roofing nails are used in construction work to fasten the roofing of buildings. Also, there are special roofing nails, which differ in a different diameter of the head and the steel rod itself. Rack nails with a round head, welded on a plastic tape with an angle of 21 degrees DIN EN10230 PE-Strips.

Scope - various wooden frames, fences, barriers, cable drums, pallets, wooden housing construction. Rack nails with a D-shaped head glued on a paper tape with a gluing angle of 34 degrees. The main application is the work with nailing tools in the production of frame structures and wooden housing construction.

Taiwan Metiz Alliance offers a turnkey complete line for cold heading nails, threading and assembling finished nails into a drum cage for pneumatic nailing guns with a capacity of up to 2500 pcs/min.

The composition of the line for the production of drum nails (turnkey)

The line consists of 3 main components:

  1. Equipment for cold heading of nails.
  2. Thread rolling equipment for the formation of threads on nails (for example, in the case of the production of screw nails or ring shank coil nails).
  3. Equipment for welding nails with steel wire into a drum holder for a nailer (high-speed collator machine).


Equipment features

  • The equipment can be supplied either separately, by components or on a turnkey basis (3 in 1).
  • An important feature of the equipment is its high productivity up to 2500 pcs/min.
  • The turnkey production time for a line of equipment is 3-4 months.



High speed cold heading equipment for nails (component 1)


RG-5G High Speed Nail Machine With Anti-Noise Cover

High Speed Nail Machine With Anti-Noise Cover 
RG-5G High Speed Nail Machine With Anti-Noise Cover 
RG-5G
Nailing machine modelRG-5G
Nail Diameter2.0 - 2.5 mm
Nail Length32 - 50 mm
Performanceup to 800 pcs/min
Power consumption7 kW
Supply voltage3 phase / AC 380V / 50 ~ 60Hz
Dimensions of equipment, L × W × H1350 × 900 × 1260 mm
Weight2500 kg
Wire gradeSAE1008-1010


The set of equipment includes:

  • wire pay-off (max 1 ton);
  • electronic control cabinet including PLC;
  • 1 set of forming tool;
  • case with anti-noise cover;
  • mounting kit;
  • operating instructions in English.
The equipment uses components from world-renowned companies: NSK bearings (Japan), Omron sensors (Japan), Schneider electrical components (France).



Operation video of RG-5G series high speed nailer




RG-9G High Speed Nail Machine With Anti-Noise Cover

High Speed Nail Machine With Anti-Noise Cover RG-9G High Speed Nail Machine With Anti-Noise Cover RG-9G


Nailing machine modelRG-9GRG-9G-XZ
Nail HeadroundD-head
Nail Diameter2.0 - 3.5 mm
Nail Length45 - 90 mm
Performanceup to 760 pcs/min
Power consumption7 kW
Supply voltage3 phase / AC 380V / 50 ~ 60Hz
Dimensions of equipment, L × W × H1400 × 1200 × 1100 mm
Weight2800 kg
Wire gradeSAE1008-1010


The set of equipment includes:

  • wire pay-off (max 1 ton);
  • electronic control cabinet including PLC;
  • 1 set of forming tool;
  • case with anti-noise cover;
  • mounting kit;
  • operating instructions in English.
The equipment uses components from world-renowned companies: NSK bearings (Japan), Omron sensors (Japan), Schneider electrical components (France).



Operation video of RG-9G series high speed nailer




RG-13G High Speed Nail Machine Without Anti-Noise Cover

high speed nailing machine 
RG-13G high speed nailing machine 
RG-13G


Nailing machine modelRG-13G
Nail Diameter2.5 - 4.5 mm
Nail Length50 - 130 mm
Performanceup to 600 pcs/min
Power consumption14 kW
Supply voltage3 phase / AC 380V / 50 ~ 60Hz
Dimensions of equipment, L × W × H1500 × 1300 × 1300 mm
Weight4000 kg
Wire gradeSAE1008-1055


The set of equipment includes:

  • wire pay-off (max for 2 tons wires);
  • electronic control cabinet including PLC;
  • 1 set of forming tool;
  • case with safety cover;
  • mounting kit;
  • operating instructions in English.
The equipment uses components from world-renowned companies: NSK bearings (Japan), Omron sensors (Japan), Schneider electrical components (France).






RG-15G High Speed Nail Machine with Anti-Noise Cover

High Speed Nail Machine 
RG-15G


Nailing machine modelRG-15G
Nail Diameter2.5 - 4.5 mm
Nail Length70 - 150 mm
Performanceup to 550 pcs/min
Power consumption14 kW
Supply voltage3 phase / AC 380V / 50 ~ 60Hz
Dimensions of equipment, L × W × H1650 × 1200 × 1300 mm
Weight4500 kg
Wire gradeSAE1008-1010


The set of equipment includes:

  • wire pay-off (max for 2 tons wires);
  • electronic control cabinet including PLC;
  • 1 set of forming tool;
  • case with safety cover;
  • mounting kit;
  • operating instructions in English.
The equipment uses components from world-renowned companies: NSK bearings (Japan), Omron sensors (Japan), Schneider electrical components (France).




Design features of Nail Machines

wire rewinding structure

The precision wire feeder makes it easy to control the length of the nail. The error in the length of each nail is controlled within ±0.3 mm. The unique combination of wire feed and return after cutting allows complete separation of the nail from the nail shank for maximum quality.


cut-off knife holder design

The cut-off knife holder has a special design (pendulum type), characterized by a shorter stroke and low mechanical wear of the cutting tool. High cutting accuracy and protection of the cutting tool - the knives work without touching each other. The service life of one set of knives reaches up to 10 million cuts. The design allows for easy adjustment of the position of the knives.


double dies and punches design

Double Upset Mode - Special design with double die and double punch. The recessed clamping jaws do not need to be changed frequently and allow us to stamp beautiful, impact-free, round nail heads of uniform thickness and perfectly centered. Also this design ensures that nail cap will be perfectly punched even nail rod is bad cutting.

clamping die
Clamping Die
Punch
Punch
nail cutters
Cut-off knives



Automatic High Speed Thread Rolling Machine for Ring Shank Nails and Screw Shank Nails RS-B6-1 (component 2)

This machine is used for making thread on the nail to increase the tightness

HIGH SPEED THREAD ROLLER RS-B6-1high speed thread roller RS-B6-1


Thread Rolling Machine Specifications

Performance2400 pcs/min
Nail Diameter2.1 mm - 4.1 mm
Nail Length30 - 90 mm
Thread LengthMax. 80 mm
Engine power5.5 kW
Vibrating hopper capacity5 kg
Dimensions of equipment, L × W × H1400 × 1400 × 1600 mm
Net weight1300 kg


The set of equipment includes:

  • Nail Feed Hopper;
  • Control Panel;
  • Thread Rolling Dies (one set);
  • Mounting Kit;
  • Instruction manual in English.


The productivity of a standard set of thread rolling dies is 100-150 tons of nails. When using a harder thread rolling die material, the cost and durability will be higher.



Thread Rolling Equipment Sketch

Thread Rolling Equipment sketch


Video of the thread rolling machine for ring shank nails and screw shank nails



Wire coil nail collator for welding nails on wire with a capacity of 2500 pcs/min (component 3)

Special collator machine that bundles nails with steel wire in drum clips is used in production of Wire Coil Nails for pneumatic nailing hammers. Ring shank nails, screw shank nails or special/smooth shank nails are used as blanks for the collator machine. The collator machine has a built-in varnishing and painting system.

Wire Coil Nail Collator
Coiled Nails for Pneumatic Nail Gun


Nail Collator Sketch

Nail Collator Sketch


Model RG25

wire coil nail collator for welding nails on wire
  1. Receiving mechanism
  2. Switching mechanism
  3. Accumulation plate
  4. Pressing mechanism
  5. Vibrating bowl
  6. Hopper
  7. Wire feed wheel
  8. The guide
  9. Electric control cabinet
  10. Wheel of accumulation
  11. Coating cabinet
  12. Control panel
  13. Cutting mechanism
  14. Coil twisting mechanism
  15. Disk of curling
  16. Motor


RG25 Specifications

wire coil nail collator for welding nails on wire
  • Productive capacity: 2500 pcs/min
  • Nail Diameter: 2.10 ~ 3.70 mm
  • Nail Length: 25 ~ 100 mm
  • Collation angle: 0 and 16 degrees
  • Electrical Power Supply: 380V, 3 Phase / 220V / 50 ~ 60Hz
  • Overall Dimensions (W × L × H): 1500 × 5000 × 1800 mm
  • Nail number: 200 ~ 400 pcs.


More detailed information about collator machines for the production of bobbin nails (drum nails) is published on the page.

We also supply equipment for the production of paper strip nails.



Finished product - nail gun nails in coil pack bundle

Nails for a pneumatic gun, nailer are a set of several dozen metal nails, connected in special bobbins or cassettes for placing in a gun magazine. Serve for fixing parts or materials to the base. Provides a strong connection between the elements. Various bundles of nails in a cassette are used. Wiring, for example, is common when joining smooth, screw and ring nails into a drum cage. And rack nails are tied with a tape of plastic or paper. For pallets (they are also wooden pallets), drum nails up to 400 pieces in one reel are used. For stronger fastening, ring knurled nails are used, and screw knurled nails enter frozen wood much more easily. For work with metal or concrete, dowel-nails in a plastic clip are used. And for those parts in which the attachment point is subsequently processed with a milling cutter on a machine, nails made of aluminum are used.

Coiled Nails Coil Nails for Nailer Coiled Nails for Pneumatic Nail Gun Operation


Pneumatic nailer

A pneumatic nail gun (pneumatic nailer) is used at all stages of construction and work on wood and concrete: for example, from the installation of load-bearing structures and battens, to the installation of the roof and fixing the platbands. The tool is also used in apartment renovation, installing doors and window sills, assembling furniture, making pallets, boxes and other products.


pneumatic nailer



CONTACT US:
Copyright © 2007 - 2024 Rost Group & Technology Co., Ltd 
(coordinator and exclusive representative)